Top 10 Best Blade For Cutting Hardie Board [2022]

Last Update:

Our team studied on 51994 reviews available online for Blade For Cutting Hardie Board, chose the finest ones and prepared Blade For Cutting Hardie Board Reviews for you. It was very difficult to shortlist the ideal Blade For Cutting Hardie Board from thousands of products online. However, We tried to make sure that you get only the Best Blade For Cutting Hardie Board from our suggestions. Check our listings-:

Best Blade For Cutting Hardie Board
Disclaimer: As An Amazon Associate I Earn From Qualifying Purchases.
NoProductScoreAction
1Irwin 15702ZR 7-1/4" 6-Tooth Fiber Cut Cement Board Saw Blade9.8
2Irwin Tools 15702ZR 7-1/4" 6T Fiber Cement Irwin Classic9.6
3TOMAX PCDM10 Inch 6 Tooth Polycrystalline Diamond Tipped (PCD) Hardie Fiber Cement Saw Blade with 5/8-Inch Arbor9.6
4WEN BL0704 7-1/4-Inch 4-Tooth Diamond-Tipped (PCD) Professional Circular Saw Blade for Fiber Cement and Laminate Flooring9.2
5Freud D0704DH Diablo 7-1/4"x4T PCD Tip TCG Hardie Fiber Cement Saw Bld9.2
6PacTool SS724 Snapper Shear Pro Fiber Cement Cutting Shear9
7Norske Tools NCSBP281 6-1/2 inch 4 Tooth Polycrystalline Diamond (PCD) Hardie Fiber Cement Saw Blade9
8Freud D1208DH Diablo 12-Inch by 8 Tooth Polycrystalline Diamond Tipped TCG Hardie Fiber Cement Saw Blade8.8
9IRWIN Tools Polycrystalline Diamond-Tipped Fiber Cement Circular Saw Blade8.8
10Bullet Tools - 213 13 in. EZ Shear Siding Cutter with blade for hardie plank8.4

Comparison Chart for Best Blade For Cutting Hardie Board

51994 reviews were considered when writing our recommendations for the Blade For Cutting Hardie Board in this article.

Comparison Chart of Top 10 Blade For Cutting Hardie Board

Table Of Content:

1. Irwin 15702ZR 7-1/4″ 6-Tooth Fiber Cut Cement Board Saw Blade

Irwin 15702ZR 7-1/4
  • Sold on Amazon

2. Irwin Tools 15702ZR 7-1/4″ 6T Fiber Cement Irwin Classic

Irwin Tools 15702ZR 7-1/4
  • General-purpose blade for cutting hard and softwoods
  • Precision-ground teeth for smooth, accurate cuts
  • Corrosion-resistant coating helps prevent rusting
  • Square top tooth grind
  • C4 carbide tip
  • 6 tooth blade for single sheet cuts
  • Hardened and tempered blade body

3. TOMAX PCDM10 Inch 6 Tooth Polycrystalline Diamond Tipped (PCD) Hardie Fiber Cement Saw Blade with 5/8-Inch Arbor

TOMAX PCDM10 Inch 6 Tooth Polycrystalline Diamond Tipped (PCD) Hardie Fiber Cement Saw Blade with 5/8-Inch Arbor
  • Specially designed for cutting HardiePlank, Cemplank and other fiber cement products
  • Designed with 6 polycrystalline diamond-tipped teeth to prevent wear and tear
  • Features abrasion-resistant polycrystalline diamond tipped for faster cutting and increased cutting life.
  • Extra-large gullet design improves material removal and minimizes dust

4. WEN BL0704 7-1/4-Inch 4-Tooth Diamond-Tipped (PCD) Professional Circular Saw Blade for Fiber Cement and Laminate Flooring

WEN BL0704 7-1/4-Inch 4-Tooth Diamond-Tipped (PCD) Professional Circular Saw Blade for Fiber Cement and Laminate Flooring
  • Featuring a 7-1/4-inch diameter (184 mm), a 5/8-inch arbor (15.88 mm) and a rating of up to 7000 RPM
  • Perfect for slicing through fiber cement board and laminate flooring
  • Ultra-thin 1/15-inch kerf (1.8 mm) provides clean and efficient cuts
  • Designed with 4 polycrystalline diamond-tipped teeth to prevent wear and tear
  • Compatible with the majority of 7-1/4-inch circular saws, tile saws, and track saws

5. Freud D0704DH Diablo 7-1/4″x4T PCD Tip TCG Hardie Fiber Cement Saw Bld

  • The product is 7-1/4x4T Cement Blade
  • Easy to use
  • The product is manufactured in China
  • The only approved James Hardie polycrystalline diamond (PCD) tipped fiber cement saw blade
  • The PCD triple chip design offers up to 60-times longer cutting life than standard carbide blades, Imported.

6. PacTool SS724 Snapper Shear Pro Fiber Cement Cutting Shear

PacTool SS724 Snapper Shear Pro Fiber Cement Cutting Shear, Works With Any 18 Volt Cordless Drill, Cuts ¼” And ½” HardieBacker With Minimal Dust, Makes Straight, Right Angle, Curved and Circle Cuts
  • FITS ONTO ANY DRILL- Bring your own drill the Snapper Shear Pro attaches to any cordless drill (recommended 18V or higher for best performance).
  • POWERFUL BLADES- Cuts ¼” and 1/2” HardieBacker backer board with ease
  • CUT ANY SHAPE ANYWHERE- Straight right-angle and curve cuts even circle cuts as small as 3” diameter.
  • LESS DUST LESS MESS- Keep the job OSHA compliant this unique backerboard shear design allows for both indoor and outdoor operation Use indoors without covering the house in dust easy clean up!.
  • ONE SIZE FITS ALL- Adjusts for right or left-handed users
  • HANDLE- Adapts for right or left-handed users

7. Norske Tools NCSBP281 6-1/2 inch 4 Tooth Polycrystalline Diamond (PCD) Hardie Fiber Cement Saw Blade

Norske Tools NCSBP281 6-1/2 inch 4 Tooth Polycrystalline Diamond (PCD) Hardie Fiber Cement Saw Blade
  • 6-1/2 Inches x 4 PCD Teeth
  • Polycrystalline diamond
  • Specially designed for cutting HardiePlank, Cemplank and other fiber cement products
  • Features abrasion-resistant polycrystalline diamond carbide for faster cutting and increased cutting life.
  • Extra-large gullet design improves material removal and minimizes dust
  • Laser-cut body, anti-vibration and expansion slots reduce noise and vibration during operation

8. Freud D1208DH Diablo 12-Inch by 8 Tooth Polycrystalline Diamond Tipped TCG Hardie Fiber Cement Saw Blade

Freud D1208DH Diablo 12-Inch by 8 Tooth Polycrystalline Diamond Tipped TCG Hardie Fiber Cement Saw Blade, Multi
  • Freud’s limited lifetime
  • 12X8 PCD FIBER CEMENT BLADE
  • The PCD triple chip design offers up to 60 times longer cutting life than standard carbide blades
  • Anti-vibration design stabilizes the blade and reduces noise while cutting and Non-Stick Parma-Shield coating to reduce heat.

9. IRWIN Tools Polycrystalline Diamond-Tipped Fiber Cement Circular Saw Blade

IRWIN Tools Polycrystalline Diamond-Tipped Fiber Cement Circular Saw Blade, 7 1/4-inch, 4-Tooth (4935473)
  • Polycrystalline, diamond-tipped teeth provide longer circular saw blade life
  • Circular saw blades last up to 15x longer compared to standard carbide-fiber cement blades
  • Circular saw blade creates less dust compared to a standard carbide-fiber cement blade
  • Cuts up to 9,000′ or 5 stacks of fiber cement
  • 4 TPI
  • Polycrystalline, diamond-tipped teeth provide longer circular saw blade life
  • Circular saw blades last up to 15x longer compared to standard carbide-fiber cement blades
  • Circular saw blade creates less dust compared to a standard carbide-fiber cement blade
  • Cuts up to 9,000′ or 5 stacks of fiber cement
  • 4 TPI

10. Bullet Tools – 213 13 in. EZ Shear Siding Cutter with blade for hardie plank

Bullet Tools - 213 13 in. EZ Shear Siding Cutter with blade for hardie plank, vinyl siding, fiber-cement siding, and trim
  • Cut Where You Work – Save time walking to and from your saw
  • One shear blade outlasts over 20 saw blades
  • Quiet Operation / No Electricity – Cut anytime day or night
  • DUST FREE cutting provides a healthier job site
  • Made in the USA

Blade For Cutting Hardie Board Buying Guide


Does the thought of finding a great Blade For Cutting Hardie Board stress you out? Has your mind been juggling between choices when it comes to buying Blade For Cutting Hardie Board in general, specifically regarding which model to choose?
If that’s the case, know that you’re not alone. Many people find it tough to buy the perfect Blade For Cutting Hardie Board for themselves. We understand the stress associated with the buying process!
Since you’re here, you are obviously curious about Blade For Cutting Hardie Board Reviews. You’ve been bombarded with information, so you need to find a reputable source with credible options before you make any decisions on which product would be best for your needs.
There are many sources that’ll provide you with that information- buying guides or ratings websites, word-of-mouth testimonials from friends or family members, online forums where users share their personal experiences, product reviews specifically found all over the internet and YouTube channels. Only thorough research will ensure that you get the right product.
But that’s not always easy, right? That's why we've taken time to compile a list of the best Blade For Cutting Hardie Board in today's market, on your behalf, so that there will be no more worries for you.
How did we come up with the list, you ask? How did we create this buying guide?
  • First, our algorithms collected as much information available about these products from trusted sources.
  • We employed both Artificial Intelligence and large data volume to validate all collected information.
  • Then our AI ranked them on their quality-to-price ratio using industry-standard criteria that let us pick the best Blade For Cutting Hardie Board currently on the market!
The products aren’t chosen randomly. We consider several criteria before assembling a list. Some of the criteria are discussed below-
  1. Brand Value: What happens when you go for a not-so-reputable brand just because the price seems cheap? Well, the chance of getting a short-lasting product goes higher. That’s because the renowned brands have a reputation to maintain, others don’t.
Top Blade For Cutting Hardie Board brands try to offer some unique features that make them stand out in the crowd. Thus hopefully, you’ll find one ideal product or another in our list.
  1. Features: You don’t need heaps of features, but useful ones. We look at the features that matter and choose the top Blade For Cutting Hardie Board based on that.
  2. Specifications: Numbers always help you measure the quality of a product in a quantitative way. We try to find products of higher specifications, but with the right balance.
  3. Customer Ratings: The hundreds of customers using the Blade For Cutting Hardie Board before you won’t say wrong, would they? Better ratings mean better service experienced by a good number of people.
  4. Customer Reviews: Like ratings, customer reviews give you actual and trustworthy information, coming from real-world consumers about the Blade For Cutting Hardie Board they used.
  5. Seller Rank: Now, this is interesting! You don’t just need a good Blade For Cutting Hardie Board, you need a product that is trendy and growing in sales. It serves two objectives. Firstly, the growing number of users indicates the product is good. Secondly, the manufacturers will hopefully provide better quality and after-sales service because of that growing number.
  6. Value For The Money: They say you get what you pay for. Cheap isn’t always good. But that doesn’t mean splashing tons of money on a flashy but underserving product is good either. We try to measure how much value for the money you can get from your Blade For Cutting Hardie Board before putting them on the list.
  7. Durability: Durability and reliability go hand to hand. A robust and durable Blade For Cutting Hardie Board will serve you for months and years to come.
  8. Availability: Products come and go, new products take the place of the old ones. Probably some new features were added, some necessary modifications were done. What’s the point of using a supposedly good Blade For Cutting Hardie Board if that’s no longer continued by the manufacturer? We try to feature products that are up-to-date and sold by at least one reliable seller, if not several.
  9. Negative Ratings: Yes, we take that into consideration too! When we pick the top rated Blade For Cutting Hardie Board on the market, the products that got mostly negative ratings get filtered and discarded.

These are the criteria we have chosen our Blade For Cutting Hardie Board on. Does our process stop there? Heck, no! The most important thing that you should know about us is, we're always updating our website to provide timely and relevant information.
Since reader satisfaction is our utmost priority, we have a final layer of filtration. And that is you, the reader! If you find any Blade For Cutting Hardie Board featured here Incorrect, irrelevant, not up to the mark, or simply outdated, please let us know. Your feedback is always welcome and we’ll try to promptly correct our list as per your reasonable suggestion.

Leave a Reply